Microtek MAX + SERIES 1KVA
Microtek MAX + SERIES 1KVA - DC Voltage 36 V
Charge Current 9.5 Amps
INPUT
Input Voltage Range (Load < 50%) 118 ~ 295 V (± 5 V)
Input Voltage range ((Load > 50%)) 160 ~ 295 V (± 5 V)
Frequency 40 ~ 70 Hz
Phase Single Phase with Ground
Power Factor ≥ 0.99 @ full load
Communication Interface RS232,SNMP (Optional)
Indication LCD Display
Noise Level Less than 50dBA @ 1 Meter (With Fan Speed Control)
UPS Overload / UPS Short-Circuit 110% / 300%
OUTPUT
Voltage Range 208 / 220 / 230 / 240 V AC
Frequency Range (Synchronized Range) 47 ~ 53 Hz or 57 ~ 63 Hz
Frequency Range (Battery Mode) 50 Hz ± 0.1 Hz or 60Hz ± 0.1 Hz
THD (Linear Load) ≤ 2%
THD (Non Linear Load) ≤ 4%
Overload > 110%, 30s turn to Bypass Mode
> 150% instant turn to Bypass
Crest Factor 3:1 (Max)
Short Circuit Protection 5 cycles turn Off Inverter, no transfer to Bypass, provide Alarm (AC Mode), 5 cycles turn Off Inverter, provide Alarm(Battery Mode), Input Fuse blown or Breaker action
Waveform Pure Sinewave
Transfer time
(AC Mode to Battery Mode)
(Inverter to Bypass Mode)
Zero
< 4 ms
Efficiency 85%~ 92%
Microtek MAX + SERIES 2KVA
Microtek MAX + SERIES 2KVA - BATTERY
DC Voltage 72 V
Charge Current 9.5 Amps
INPUT
Input Voltage Range (Load < 50%) 118 ~ 295 V (± 5 V)
Input Voltage range ((Load > 50%)) 160 ~ 295 V (± 5 V)
Frequency 40 ~ 70 Hz
Phase Single Phase with Ground
Power Factor ≥ 0.99 @ full load
Communication Interface RS232,SNMP (Optional)
Indication LCD Display
Noise Level Less than 50dBA @ 1 Meter (With Fan Speed Control)
UPS Overload / UPS Short-Circuit 110% / 300%
OUTPUT
Voltage Range 208 / 220 / 230 / 240 V AC
Frequency Range (Synchronized Range) 47 ~ 53 Hz or 57 ~ 63 Hz
Frequency Range (Battery Mode) 50 Hz ± 0.1 Hz or 60Hz ± 0.1 Hz
THD (Linear Load) ≤ 2%
THD (Non Linear Load) ≤ 4%
Overload > 110%, 30s turn to Bypass Mode
> 150% instant turn to Bypass
Crest Factor 3:1 (Max)
Short Circuit Protection 5 cycles turn Off Inverter, no transfer to Bypass, provide Alarm (AC Mode), 5 cycles turn Off Inverter, provide Alarm(Battery Mode), Input Fuse blown or Breaker action
Waveform Pure Sinewave
Transfer time
(AC Mode to Battery Mode)
(Inverter to Bypass Mode)
Zero
< 4 ms
Efficiency 85%~ 92%
Microtek MAX + SERIES 3KVA
Microtek MAX + SERIES 3KVA - Rated Capacity 3 KVA / 2700 Watts.BATTERY
DC Voltage 72 V
Charge Current 9.5 Amps
INPUT
Input Voltage Range (Load < 50%) 118 ~ 295 V (± 5 V)
Input Voltage range ((Load > 50%)) 160 ~ 295 V (± 5 V)
Frequency 40 ~ 70 Hz
Phase Single Phase with Ground
Power Factor ≥ 0.99 @ full load
Communication Interface RS232,SNMP (Optional)
Indication LCD Display
Noise Level Less than 50dBA @ 1 Meter (With Fan Speed Control)
UPS Overload / UPS Short-Circuit 110% / 300%
OUTPUT
Voltage Range 208 / 220 / 230 / 240 V AC
Frequency Range (Synchronized Range) 47 ~ 53 Hz or 57 ~ 63 Hz
Frequency Range (Battery Mode) 50 Hz ± 0.1 Hz or 60Hz ± 0.1 Hz
THD (Linear Load) ≤ 2%
THD (Non Linear Load) ≤ 4%
Overload > 110%, 30s turn to Bypass Mode
> 150% instant turn to Bypass
Crest Factor 3:1 (Max)
Short Circuit Protection 5 cycles turn Off Inverter, no transfer to Bypass, provide Alarm (AC Mode), 5 cycles turn Off Inverter, provide Alarm(Battery Mode), Input Fuse blown or Breaker action
Waveform Pure Sinewave
Transfer time
(AC Mode to Battery Mode)
(Inverter to Bypass Mode)
Zero
< 4 ms
Efficiency 85%~ 92%
Microtek Sinewave UPS XP SW 2300
Microtek Sinewave UPS XP SW 2300 - input voltage standard range 90V - 300V input voltage narrow range 180V - 260V output voltage mains mode same as input output voltage ups mode 200V -260V output waveform mains mode same as input output waveform ups mode tpzi waveform swich over from mains to ups and ups to mains ( Automatic ) Design micro controller based design battery charging current 10% of the rated battery current in AH ups overload / ups short - circuit 110% - 300%
Microtek UPS JM SW 4000/48V
Microtek UPS JM SW 4000/48V - Rated Capacity 3.7 KVA
Output Power 2960 Watts
Battery 4 Battery System (48 VDC)
Waveform Pure Sinewave INPUT
Input Voltage (Standard range) 110 V ~ 280 V
Input Voltage (Narrow range) 180V ~ 265 V
OUTPUT
Output Voltage (Mains Mode) Same as Input
Output Voltage (UPS Mode) 180~230 V (± 10V)
Output Waveform (Mains Mode) Same as Input
Output Waveform (UPS Mode) Pure Sinewave
CHANGEOVER
Switchover from Mains to UPS and UPS to Mains Automatic
UPS Transfer Time ≤ 15 msec.
TECHNOLOGY
Design Micro Controller Based Design
Battery Charging Current 17 Amps ± 3 Amps
UPS Overload / UPS Short-circuit ≥110% / ≥ 300%
Browns on Mains Voltage 100V ± 10V
Efficiency (Battery Mode) > 80%
Auto Reset Feature Yes
Input DC Range 42 V ~ 56.8 V
Air Conditioner TDR Upto 1.0 Tons
Microtek UPS JM SW 5500/48V
Microtek UPS JM SW 5500/48V - Rated Capacity 5.2 KVA
Output Power 4160 Watts
Battery 4 Battery System (48 VDC)
Waveform Pure Sinewave INPUT
Input Voltage (Standard range) 110 V ~ 280 V
Input Voltage (Narrow range) 180V ~ 265 V
OUTPUT
Output Voltage (Mains Mode) Same as Input
Output Voltage (UPS Mode) 180~230 V (± 10V)
Output Waveform (Mains Mode) Same as Input
Output Waveform (UPS Mode) Pure Sinewave
CHANGEOVER
Switchover from Mains to UPS and UPS to Mains Automatic
UPS Transfer Time ≤ 15 msec.
TECHNOLOGY
Design Micro Controller Based Design
Battery Charging Current 17 Amps ± 3 Amps
UPS Overload / UPS Short-circuit ≥110% / ≥ 300%
Browns on Mains Voltage 100V ± 10V
Efficiency (Battery Mode) > 80%
Auto Reset Feature Yes
Input DC Range 42 V ~ 56.8 V
Air Conditioner TDR Upto 2.0 Tons
Microtek UPS LEGEND 1000
Microtek UPS LEGEND 1000
Microtek UPS LEGEND 650